Strings which an application sends to the terminal in OSC, DCS, etc
are typically small (title, colors, etc) but one exception is OSC 52
which copies text to the clipboard, and is used for instance by tmux.
Previously st cropped these strings at 512 bytes, which for OSC 52
limited the copied text to 382 bytes (remaining buffer space before
base64). This made it less useful than it can be.
Now it's a dynamic growing buffer. It remains allocated after use,
resets to 512 when a new string starts, or leaked on exit.
Resetting/deallocating the buffer right after use (at strhandle) is
possible with some more code, however, it doesn't always end up used,
and to cover those cases too will require even more code, so resetting
only on new string is good enough for now.
STRescape holds strings in escape sequences such as OSC and DCS, and
its buffer is 512 bytes.
If the input is too big then trailing chars are ignored, but the test
was off-by-1 such that it took 510 chars instead of 511 (before a
terminating NULL is added).
Now the full size can be utilized.
Previously, base64dec checked terminating input '\0' every 4 calls to
base64dec_getc, where the latter progressed one or more chars on each
call, and could read past '\0' in the way it was used.
The input to base64dec currently comes only from OSC 52 escape seq
(copy to clipboard), and reading past '\0' or even past the buffer
boundary was easy to trigger.
Also, even if we could trust external input to be valid base64, there
are different base64 standards, and not all of them require padding
to 4 bytes blocks (using trailing '=' chars).
It didn't affect short OSC 52 strings because the buffer is initialized
to 0's, so typically it did stop within the buffer, but if the string
was trimmed to fit (the buffer is 512 bytes) then it did also read past
the end of the buffer, and the decoded suffix ended up arbitrary.
This patch makes base64dec_getc not progress past '\0', and instead
produce fake trailing padding of '='.
Additionally, at base64dec, if padding is detected at the first or
second byte of a quartet, then we identify it as invalid and abort
(a valid quartet has at least two leading non-padding bytes).
"use iswspace()/iswpunct() to find word delimiters
this inverts the configuration logic: you no longer provide a list of
delimiters -- all space and punctuation characters are considered
delimiters, unless listed in extrawordchars."
Feedback from IRC and personal preference.
this inverts the configuration logic: you no longer provide a list of
delimiters -- all space and punctuation characters are considered
delimiters, unless listed in extrawordchars.
Features:
- Allow input methods swap with hotkey (E.g. left ctrl + left shift).
- Over-the-spot pre-editing style, pre-edit data placed over insertion point.
- Restart IME without segmentation fault.
TODO:
- Automatically pickup IME if st started before IME
When possible, declare functions/variables static and move struct
definitions out of headers. In order to allow utf8decode to become
internal, use codepoint for DECSCUSR extension directly.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Prefer passing arguments to declaring external global variables. The
only remaining usage of extern is for config.h variables which are
needed in st.c instead of x.c (where it is now included).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The xinit function only needs to the rows/cols, so pass those in rather
than accessing term directly. With a bit of arithmetic, we are able to
avoid the need for term.row and term.col in x2col, y2row, and
xdrawglyphfontspecs as well, completing the removal.
Term is now fully internal to st.c.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Gradually reducing x.c dependency on Term object. Old and new cursor
glyph/position are passed to xdrawcursor. (There may be an opportunity
to refactor further if we can unify "clear old cursor" and "draw new
cursor" functionality.)
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Introduces three functions to encapsulate X-specific behavior:
* xdrawline: draws a portion of a single line (used by drawregion)
* xbegindraw: called to prepare for drawing (will be useful for e.g.
Wayland) and returns true if drawing should happen
* xfinishdraw: called to finish drawing (used by draw)
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Moves the mode bits used by x.c from Term to TermWindow, absorbing
UI/input-related mode bits (visible/focused/numlock) along the way.
This is gradually reducing external references to Term. Since
TermWindow is already internal to x.c, we add xsetmode() to allow st to
modify window bits in accordance with escape sequences.
IS_SET() is redefined accordingly (term.mode in st.c, win.mode in x.c).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This also allows us to remove the crlf field from the Key struct, since
the only difference it made was converting "\r" to "\r\n" (which is now
done automatically in ttywrite). In addition, MODE_CRLF is no longer
referenced from x.c.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The only thing differentiating ttywrite and ttysend was the potential
for echo; make this a parameter and remove ttysend.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The "done" parameter indicates a change which finalizes the selection
(e.g. a mouse button release as opposed to motion).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The front-end determines information about mouse clicks and motion, and
the terminal handles the actual selection start/extend/dirty logic by
row and column.
While we're in the neighborhood, we'll also rename getbuttoninfo() to
mousesel() which is, at least, less wrong.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This removes ttynew's dependency on cresize being called first, and then
allows us to absorb the ttyresize call into cresize (which always
precedes it).
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
None of the X-related includes are needed any longer. In addition, move
the X modifier defines into x.c, as they are not used outside.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This is an X type and should be internal to x.c.
The selcopy() function was a single line and only used in one place, so
it was inlined to reduce LOC.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
There was only a single reference to the `win` variable in st.c, so
exporting that to x.c allows us to rid ourselves of another extern.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
config.h includes references to KeySyms and other X stuff. Until we
come up with a cleaner way to separate configuration, it is simpler
(leads to more code removal) to have this here.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
The echo-to-terminal portions of ttyread and ttysend were actually doing
the same thing. New function twrite() now handles this. The parameter
show_ctrl determines whether control characters are shown as "^A". This
was the only difference between tputc and techo, and techo is now unused
and removed.
(This commit should not change st's behaviour.)
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
This commit is purely about reducing externs and LOC. If the main and
run functions ever move elsewhere (which will probably make sense
eventually), these should come along with them.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Jonathan Hodgson
Avi Halachmi (:avih)
Hiltjo Posthuma
Lauri Tirkkonen
Ivan Tham
Quentin Rameau
Daniel Tameling
Devin J. Pohly