Print control codes only in graphic mode

Non handled codes must be ignored, except in graphic mode. Also STR
sequences have higher priority than control codes, so they must be handled
before of them.
---
 st.c |  160 ++++++++++++++++++++++++++++++++++++------------------------------
 1 file changed, 87 insertions(+), 73 deletions(-)
master
Roberto E. Vargas Caballero 12 years ago
parent 034dc71fb8
commit 2bd0c23fa7
  1. 160
      st.c

160
st.c

@ -1784,56 +1784,80 @@ tputtab(bool forward) {
void void
tputc(char *c, int len) { tputc(char *c, int len) {
uchar ascii = *c; uchar ascii = *c;
bool control = ascii < '\x20' || ascii == 0177;
if(iofd != -1) if(iofd != -1)
write(iofd, c, len); write(iofd, c, len);
/*
switch(ascii) { * STR sequences must be checked before of anything
case '\t': /* HT */ * because it can use some control codes as part of the sequence
tputtab(1); */
return; if(term.esc & ESC_STR) {
case '\b': /* BS */ switch(ascii) {
tmoveto(term.c.x-1, term.c.y); case '\033':
return; term.esc = ESC_START | ESC_STR_END;
case '\r': /* CR */
tmoveto(0, term.c.y);
return;
case '\f': /* LF */
case '\v': /* VT */
case '\n': /* LF */
/* go to first col if the mode is set */
tnewline(IS_SET(MODE_CRLF));
return;
case '\a': /* BEL */
if(term.esc & ESC_STR)
break; break;
if(!(xw.state & WIN_FOCUSED)) case '\a': /* backwards compatibility to xterm */
xseturgency(1); term.esc = 0;
return; strhandle();
case '\033': /* ESC */ break;
csireset(); default:
term.esc = ESC_START; strescseq.buf[strescseq.len++] = ascii;
return; if(strescseq.len+1 >= STR_BUF_SIZ) {
case '\016': /* SO */ term.esc = 0;
term.c.attr.mode |= ATTR_GFX; strhandle();
break; }
case '\017': /* SI */ }
term.c.attr.mode &= ~ATTR_GFX;
return;
case '\032': /* SUB */
case '\030': /* CAN */
csireset();
return; return;
default:
/* case '\005': ENQ (IGNORED) */
/* case '\000': NUL (IGNORED) */
/* case '\021': XON (IGNORED) */
/* case '\023': XOFF (IGNORED) */
/* case 0177: DEL (IGNORED) */
break;
} }
/*
if(term.esc & ESC_START) { * Actions of control codes must be performed as soon they arrive
* because they can be embedded inside a control sequence, and
* they must not cause conflicts with sequences.
*/
if(control) {
switch(ascii) {
case '\t': /* HT */
tputtab(1);
return;
case '\b': /* BS */
tmoveto(term.c.x-1, term.c.y);
return;
case '\r': /* CR */
tmoveto(0, term.c.y);
return;
case '\f': /* LF */
case '\v': /* VT */
case '\n': /* LF */
/* go to first col if the mode is set */
tnewline(IS_SET(MODE_CRLF));
return;
case '\a': /* BEL */
if(!(xw.state & WIN_FOCUSED))
xseturgency(1);
return;
case '\033': /* ESC */
csireset();
term.esc = ESC_START;
return;
case '\016': /* SO */
term.c.attr.mode |= ATTR_GFX;
return;
case '\017': /* SI */
term.c.attr.mode &= ~ATTR_GFX;
return;
case '\032': /* SUB */
case '\030': /* CAN */
csireset();
return;
case '\005': /* ENQ (IGNORED) */
case '\000': /* NUL (IGNORED) */
case '\021': /* XON (IGNORED) */
case '\023': /* XOFF (IGNORED) */
case 0177: /* DEL (IGNORED) */
return;
}
} else if(term.esc & ESC_START) {
if(term.esc & ESC_CSI) { if(term.esc & ESC_CSI) {
csiescseq.buf[csiescseq.len++] = ascii; csiescseq.buf[csiescseq.len++] = ascii;
if(BETWEEN(ascii, 0x40, 0x7E) if(BETWEEN(ascii, 0x40, 0x7E)
@ -1841,22 +1865,6 @@ tputc(char *c, int len) {
term.esc = 0; term.esc = 0;
csiparse(), csihandle(); csiparse(), csihandle();
} }
} else if(term.esc & ESC_STR) {
switch(ascii) {
case '\033':
term.esc = ESC_START | ESC_STR_END;
break;
case '\a': /* backwards compatibility to xterm */
term.esc = 0;
strhandle();
break;
default:
strescseq.buf[strescseq.len++] = ascii;
if(strescseq.len+1 >= STR_BUF_SIZ) {
term.esc = 0;
strhandle();
}
}
} else if(term.esc & ESC_STR_END) { } else if(term.esc & ESC_STR_END) {
term.esc = 0; term.esc = 0;
if(ascii == '\\') if(ascii == '\\')
@ -1955,20 +1963,26 @@ tputc(char *c, int len) {
term.esc = 0; term.esc = 0;
} }
} }
} else { /*
if(sel.bx != -1 && BETWEEN(term.c.y, sel.by, sel.ey)) * All characters which forms part of a sequence are not
sel.bx = -1; * printed
if(ascii >= '\020' || term.c.attr.mode & ATTR_GFX) { */
if(IS_SET(MODE_WRAP) && term.c.state & CURSOR_WRAPNEXT) return;
tnewline(1); /* always go to first col */
tsetchar(c);
if(term.c.x+1 < term.col) {
tmoveto(term.c.x+1, term.c.y);
} else {
term.c.state |= CURSOR_WRAPNEXT;
}
}
} }
/*
* Display control codes only if we are in graphic mode
*/
if(control && !(term.c.attr.mode & ATTR_GFX))
return;
if(sel.bx != -1 && BETWEEN(term.c.y, sel.by, sel.ey))
sel.bx = -1;
if(IS_SET(MODE_WRAP) && term.c.state & CURSOR_WRAPNEXT)
tnewline(1); /* always go to first col */
tsetchar(c);
if(term.c.x+1 < term.col)
tmoveto(term.c.x+1, term.c.y);
else
term.c.state |= CURSOR_WRAPNEXT;
} }
int int

Loading…
Cancel
Save