You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
110 lines
3.2 KiB
110 lines
3.2 KiB
#SONOFF T1 EU/UK (1 button) |
|
#https://www.banggood.com/SONOFF-T1-EU-or-UK-AC-100-240V-1-or-2-or-3-Gang-TX-Series-WIFI-Wall-Switch-433Mhz-RF-Remote-Controlled-Wifi-Switch-Smart-Home-Switch-Works-With-Alexa-Google-Home-p-1470883.html?rmmds=myorder&cur_warehouse=UK&ID=6278514 |
|
|
|
esphome: |
|
name: bedroom_switch |
|
platform: ESP8266 |
|
board: esp01_1m |
|
|
|
wifi: |
|
ssid: !secret wifi-ssid |
|
password: !secret wifi-password |
|
|
|
logger: |
|
api: |
|
ota: |
|
|
|
# This is the button on the switch |
|
# It is no longer published to home assistant, it is instead used by esphome to |
|
# update the state of a "virtual" sensor. This is how I distinguish |
|
# between a single, double and hold push |
|
binary_sensor: |
|
- platform: gpio |
|
name: "Bedroom Sensor" |
|
pin: |
|
number: GPIO0 |
|
mode: INPUT_PULLUP |
|
inverted: True |
|
filters: |
|
- delayed_on: 30ms |
|
- delayed_off: 30ms |
|
internal: True |
|
on_multi_click: |
|
# Single |
|
- timing: |
|
- ON for at most 1s |
|
- OFF for at least 0.5s |
|
then: |
|
- text_sensor.template.publish: |
|
id: bedroom_button |
|
state: !lambda 'return "single";' |
|
# Double |
|
- timing: |
|
- ON for at most 1s |
|
- OFF for at most 1s |
|
- ON for at most 1s |
|
- OFF for at least 0.2s |
|
then: |
|
- text_sensor.template.publish: |
|
id: bedroom_button |
|
state: !lambda 'return "double";' |
|
# Hold |
|
- timing: |
|
- ON for 1s to 3s |
|
- OFF for at least 0.5s |
|
then: |
|
- text_sensor.template.publish: |
|
id: bedroom_button |
|
state: !lambda 'return "hold";' |
|
# There is a bit of a delay between pushing the button on the switch and |
|
# the light turning on. This is for 2 main reasons: |
|
# * There is a bit of a delay for the switch to decide if a single or |
|
# double press was wanted |
|
# * The smart bulbs take a little while to turn on |
|
# To give some instant feedback to the user, I re-purpose the wifi light. |
|
# Whenever the touchpad is being pushed, the light is on. |
|
# This makes it clear that the push has been registered. |
|
on_press: |
|
then: |
|
- output.turn_on: blue_led |
|
on_release: |
|
then: |
|
- output.turn_off: blue_led |
|
|
|
# This switch gives electrisity to the bulb. We want it on all the time really |
|
switch: |
|
- platform: gpio |
|
name: "Bedroom Relay" |
|
pin: GPIO12 |
|
restore_mode: ALWAYS_ON |
|
|
|
# This is the blue wifi led. |
|
# It is used above to determine whether or not a push is registered |
|
output: |
|
- platform: esp8266_pwm |
|
id: blue_led |
|
pin: GPIO13 |
|
inverted: True |
|
|
|
# This sensor is published to homeassistant with the value: |
|
# * single |
|
# * double |
|
# * hold |
|
# This can be used to trigger automations by type "state" |
|
text_sensor: |
|
- platform: template |
|
name: "Bedroom Touchpad" |
|
id: bedroom_button |
|
icon: "mdi:toggle-switch" |
|
on_value: |
|
then: |
|
- if: |
|
condition: |
|
text_sensor.state: |
|
id: bedroom_button |
|
state: "" |
|
else: |
|
- delay: 20ms |
|
- text_sensor.template.publish: |
|
id: bedroom_button |
|
state: !lambda 'return "";'
|
|
|