Adds comments to bedroom light switch

master
Jonathan Hodgson 3 years ago
parent 8966a1de6d
commit c4ebe67d35
  1. 55
      bedroom-switch.yaml

@ -14,6 +14,10 @@ logger:
api:
ota:
# This is the button on the switch
# It is no longer published to home assistant, it is instead used by esphome to
# update the state of a "virtual" sensor. This is how I distinguish
# between a single, double and hold push
binary_sensor:
- platform: gpio
name: "Bedroom Sensor"
@ -34,15 +38,6 @@ binary_sensor:
- text_sensor.template.publish:
id: bedroom_button
state: !lambda 'return "single";'
#- homeassistant.service:
# service: input_boolean.turn_on
# data:
# entity_id: input_boolean.bedroom_single
#- delay: 0.2s
#- homeassistant.service:
# service: input_boolean.turn_off
# data:
# entity_id: input_boolean.bedroom_single
# Double
- timing:
- ON for at most 1s
@ -53,15 +48,6 @@ binary_sensor:
- text_sensor.template.publish:
id: bedroom_button
state: !lambda 'return "double";'
#- homeassistant.service:
# service: input_boolean.turn_on
# data:
# entity_id: input_boolean.bedroom_double
#- delay: 0.2s
#- homeassistant.service:
# service: input_boolean.turn_off
# data:
# entity_id: input_boolean.bedroom_double
# Hold
- timing:
- ON for 1s to 3s
@ -70,15 +56,14 @@ binary_sensor:
- text_sensor.template.publish:
id: bedroom_button
state: !lambda 'return "hold";'
#- homeassistant.service:
# service: input_boolean.turn_on
# data:
# entity_id: input_boolean.bedroom_hold
#- delay: 0.2s
#- homeassistant.service:
# service: input_boolean.turn_off
# data:
# entity_id: input_boolean.bedroom_hold
# There is a bit of a delay between pushing the button on the switch and
# the light turning on. This is for 2 main reasons:
# * There is a bit of a delay for the switch to decide if a single or
# double press was wanted
# * The smart bulbs take a little while to turn on
# To give some instant feedback to the user, I re-purpose the wifi light.
# Whenever the touchpad is being pushed, the light is on.
# This makes it clear that the push has been registered.
on_press:
then:
- output.turn_on: blue_led
@ -86,18 +71,26 @@ binary_sensor:
then:
- output.turn_off: blue_led
# This switch gives electrisity to the bulb. We want it on all the time really
switch:
- platform: gpio
name: "Bedroom Relay"
pin: GPIO12
restore_mode: ALWAYS_ON
# This is the blue wifi led.
# It is used above to determine whether or not a push is registered
output:
# Register the blue LED as a dimmable output ....
- platform: esp8266_pwm
id: blue_led
pin: GPIO13
inverted: True
# This sensor is published to homeassistant with the value:
# * single
# * double
# * hold
# This can be used to trigger automations by type "state"
text_sensor:
- platform: template
name: "Bedroom Touchpad"
@ -115,9 +108,3 @@ text_sensor:
- text_sensor.template.publish:
id: bedroom_button
state: !lambda 'return "";'
#light:
# # ... and then make a light out of it.
# - platform: monochromatic
# name: "Bedroom switch light"
# output: blue_led

Loading…
Cancel
Save