Adds new switces and lamp

study-switch.yaml

@@ -0,0 +1,57 @@
+#SONOFF T1 EU/UK (1 button)
+#https://www.banggood.com/SONOFF-T1-EU-or-UK-AC-100-240V-1-or-2-or-3-Gang-TX-Series-WIFI-Wall-Switch-433Mhz-RF-Remote-Controlled-Wifi-Switch-Smart-Home-Switch-Works-With-Alexa-Google-Home-p-1470883.html?rmmds=myorder&cur_warehouse=UK&ID=6278514
+
+esphome:
+  name: study_switch
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: !secret wifi-ssid
+  password: !secret wifi-password
+
+logger:
+api:
+ota:
+
+# This is the button on the switch
+# It is no longer published to home assistant, it is instead used by esphome to
+#       update the state of a "virtual" sensor. This is how I distinguish
+#       between a single, double and hold push
+binary_sensor:
+  - platform: gpio
+    name: "Study Sensor"
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    # There is a bit of a delay between pushing the button on the switch and
+    #       the light turning on. This is for 2 main reasons:
+    #       * There is a bit of a delay for the switch to decide if a single or
+    #            double press was wanted
+    #       * The smart bulbs take a little while to turn on
+    # To give some instant feedback to the user, I re-purpose the wifi light.
+    #       Whenever the touchpad is being pushed, the light is on.
+    # This makes it clear that the push has been registered.
+    on_press:
+      then:
+        - output.turn_on: blue_led
+    on_release:
+      then:
+        - output.turn_off: blue_led
+
+# This switch gives electrisity to the bulb. We want it on all the time really
+switch:
+  - platform: gpio
+    name: "Study Relay"
+    pin: GPIO12
+    restore_mode: ALWAYS_ON
+
+# This is the blue wifi led.
+# It is used above to determine whether or not a push is registered
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+