You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
244 lines
11 KiB
244 lines
11 KiB
# |
|
# This is the Apache server configuration file providing SSL support. |
|
# It contains the configuration directives to instruct the server how to |
|
# serve pages over an https connection. For detailed information about these |
|
# directives see <URL:http://httpd.apache.org/docs/trunk/mod/mod_ssl.html> |
|
# |
|
# Do NOT simply read the instructions in here without understanding |
|
# what they do. They're here only as hints or reminders. If you are unsure |
|
# consult the online docs. You have been warned. |
|
# |
|
# Required modules: mod_log_config, mod_setenvif, mod_ssl, |
|
# socache_shmcb_module (for default value of SSLSessionCache) |
|
|
|
# |
|
# Pseudo Random Number Generator (PRNG): |
|
# Configure one or more sources to seed the PRNG of the SSL library. |
|
# The seed data should be of good random quality. |
|
# WARNING! On some platforms /dev/random blocks if not enough entropy |
|
# is available. This means you then cannot use the /dev/random device |
|
# because it would lead to very long connection times (as long as |
|
# it requires to make more entropy available). But usually those |
|
# platforms additionally provide a /dev/urandom device which doesn't |
|
# block. So, if available, use this one instead. Read the mod_ssl User |
|
# Manual for more details. |
|
# |
|
#SSLRandomSeed startup file:/dev/random 512 |
|
#SSLRandomSeed startup file:/dev/urandom 512 |
|
#SSLRandomSeed connect file:/dev/random 512 |
|
#SSLRandomSeed connect file:/dev/urandom 512 |
|
|
|
|
|
# |
|
# When we also provide SSL we have to listen to the |
|
# standard HTTP port (see above) and to the HTTPS port |
|
# |
|
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two |
|
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" |
|
# |
|
Listen 443 |
|
|
|
## |
|
## SSL Global Context |
|
## |
|
## All SSL configuration in this context applies both to |
|
## the main server and all SSL-enabled virtual hosts. |
|
## |
|
|
|
# SSL Cipher Suite: |
|
# List the ciphers that the client is permitted to negotiate. |
|
# See the mod_ssl documentation for a complete list. |
|
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 |
|
|
|
# Speed-optimized SSL Cipher configuration: |
|
# If speed is your main concern (on busy HTTPS servers e.g.), |
|
# you might want to force clients to specific, performance |
|
# optimized ciphers. In this case, prepend those ciphers |
|
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. |
|
# Caveat: by giving precedence to RC4-SHA and AES128-SHA |
|
# (as in the example below), most connections will no longer |
|
# have perfect forward secrecy - if the server's key is |
|
# compromised, captures of past or future traffic must be |
|
# considered compromised, too. |
|
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 |
|
#SSLHonorCipherOrder on |
|
|
|
# Pass Phrase Dialog: |
|
# Configure the pass phrase gathering process. |
|
# The filtering dialog program (`builtin' is an internal |
|
# terminal dialog) has to provide the pass phrase on stdout. |
|
SSLPassPhraseDialog builtin |
|
|
|
# Inter-Process Session Cache: |
|
# Configure the SSL Session Cache: First the mechanism |
|
# to use and second the expiring timeout (in seconds). |
|
#SSLSessionCache "dbm:/opt/lampp/logs/ssl_scache" |
|
SSLSessionCache "shmcb:/opt/lampp/logs/ssl_scache(512000)" |
|
SSLSessionCacheTimeout 300 |
|
|
|
## |
|
## SSL Virtual Host Context |
|
## |
|
|
|
<VirtualHost _default_:443> |
|
|
|
# General setup for the virtual host |
|
DocumentRoot "/opt/lampp/htdocs" |
|
ServerName www.example.com:443 |
|
ServerAdmin you@example.com |
|
ErrorLog "/opt/lampp/logs/error_log" |
|
TransferLog "/opt/lampp/logs/access_log" |
|
|
|
# SSL Engine Switch: |
|
# Enable/Disable SSL for this virtual host. |
|
SSLEngine on |
|
|
|
# Server Certificate: |
|
# Point SSLCertificateFile at a PEM encoded certificate. If |
|
# the certificate is encrypted, then you will be prompted for a |
|
# pass phrase. Note that a kill -HUP will prompt again. Keep |
|
# in mind that if you have both an RSA and a DSA certificate you |
|
# can configure both in parallel (to also allow the use of DSA |
|
# ciphers, etc.) |
|
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) |
|
# require an ECC certificate which can also be configured in |
|
# parallel. |
|
SSLCertificateFile "/opt/lampp/etc/ssl.crt/server.crt" |
|
#SSLCertificateFile "/opt/lampp/etc/server-dsa.crt" |
|
#SSLCertificateFile "/opt/lampp/etc/server-ecc.crt" |
|
|
|
# Server Private Key: |
|
# If the key is not combined with the certificate, use this |
|
# directive to point at the key file. Keep in mind that if |
|
# you've both a RSA and a DSA private key you can configure |
|
# both in parallel (to also allow the use of DSA ciphers, etc.) |
|
# ECC keys, when in use, can also be configured in parallel |
|
SSLCertificateKeyFile "/opt/lampp/etc/ssl.key/server.key" |
|
#SSLCertificateKeyFile "/opt/lampp/etc/server-dsa.key" |
|
#SSLCertificateKeyFile "/opt/lampp/etc/server-ecc.key" |
|
|
|
# Server Certificate Chain: |
|
# Point SSLCertificateChainFile at a file containing the |
|
# concatenation of PEM encoded CA certificates which form the |
|
# certificate chain for the server certificate. Alternatively |
|
# the referenced file can be the same as SSLCertificateFile |
|
# when the CA certificates are directly appended to the server |
|
# certificate for convenience. |
|
#SSLCertificateChainFile "/opt/lampp/etc/server-ca.crt" |
|
|
|
# Certificate Authority (CA): |
|
# Set the CA certificate verification path where to find CA |
|
# certificates for client authentication or alternatively one |
|
# huge file containing all of them (file must be PEM encoded) |
|
# Note: Inside SSLCACertificatePath you need hash symlinks |
|
# to point to the certificate files. Use the provided |
|
# Makefile to update the hash symlinks after changes. |
|
#SSLCACertificatePath "/opt/lampp/etc/ssl.crt" |
|
#SSLCACertificateFile "/opt/lampp/etc/ssl.crt/ca-bundle.crt" |
|
|
|
# Certificate Revocation Lists (CRL): |
|
# Set the CA revocation path where to find CA CRLs for client |
|
# authentication or alternatively one huge file containing all |
|
# of them (file must be PEM encoded). |
|
# The CRL checking mode needs to be configured explicitly |
|
# through SSLCARevocationCheck (defaults to "none" otherwise). |
|
# Note: Inside SSLCARevocationPath you need hash symlinks |
|
# to point to the certificate files. Use the provided |
|
# Makefile to update the hash symlinks after changes. |
|
#SSLCARevocationPath "/opt/lampp/etc/ssl.crl" |
|
#SSLCARevocationFile "/opt/lampp/etc/ssl.crl/ca-bundle.crl" |
|
#SSLCARevocationCheck chain |
|
|
|
# Client Authentication (Type): |
|
# Client certificate verification type and depth. Types are |
|
# none, optional, require and optional_no_ca. Depth is a |
|
# number which specifies how deeply to verify the certificate |
|
# issuer chain before deciding the certificate is not valid. |
|
#SSLVerifyClient require |
|
#SSLVerifyDepth 10 |
|
|
|
# Access Control: |
|
# With SSLRequire you can do per-directory access control based |
|
# on arbitrary complex boolean expressions containing server |
|
# variable checks and other lookup directives. The syntax is a |
|
# mixture between C and Perl. See the mod_ssl documentation |
|
# for more details. |
|
#<Location /> |
|
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ |
|
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ |
|
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ |
|
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ |
|
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ |
|
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ |
|
#</Location> |
|
|
|
# SSL Engine Options: |
|
# Set various options for the SSL engine. |
|
# o FakeBasicAuth: |
|
# Translate the client X.509 into a Basic Authorisation. This means that |
|
# the standard Auth/DBMAuth methods can be used for access control. The |
|
# user name is the `one line' version of the client's X.509 certificate. |
|
# Note that no password is obtained from the user. Every entry in the user |
|
# file needs this password: `xxj31ZMTZzkVA'. |
|
# o ExportCertData: |
|
# This exports two additional environment variables: SSL_CLIENT_CERT and |
|
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the |
|
# server (always existing) and the client (only existing when client |
|
# authentication is used). This can be used to import the certificates |
|
# into CGI scripts. |
|
# o StdEnvVars: |
|
# This exports the standard SSL/TLS related `SSL_*' environment variables. |
|
# Per default this exportation is switched off for performance reasons, |
|
# because the extraction step is an expensive operation and is usually |
|
# useless for serving static content. So one usually enables the |
|
# exportation for CGI and SSI requests only. |
|
# o StrictRequire: |
|
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even |
|
# under a "Satisfy any" situation, i.e. when it applies access is denied |
|
# and no other module can change it. |
|
# o OptRenegotiate: |
|
# This enables optimized SSL connection renegotiation handling when SSL |
|
# directives are used in per-directory context. |
|
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire |
|
<FilesMatch "\.(cgi|shtml|phtml|php)$"> |
|
SSLOptions +StdEnvVars |
|
</FilesMatch> |
|
<Directory "/opt/lampp/cgi-bin"> |
|
SSLOptions +StdEnvVars |
|
</Directory> |
|
|
|
# SSL Protocol Adjustments: |
|
# The safe and default but still SSL/TLS standard compliant shutdown |
|
# approach is that mod_ssl sends the close notify alert but doesn't wait for |
|
# the close notify alert from client. When you need a different shutdown |
|
# approach you can use one of the following variables: |
|
# o ssl-unclean-shutdown: |
|
# This forces an unclean shutdown when the connection is closed, i.e. no |
|
# SSL close notify alert is sent or allowed to be received. This violates |
|
# the SSL/TLS standard but is needed for some brain-dead browsers. Use |
|
# this when you receive I/O errors because of the standard approach where |
|
# mod_ssl sends the close notify alert. |
|
# o ssl-accurate-shutdown: |
|
# This forces an accurate shutdown when the connection is closed, i.e. a |
|
# SSL close notify alert is send and mod_ssl waits for the close notify |
|
# alert of the client. This is 100% SSL/TLS standard compliant, but in |
|
# practice often causes hanging connections with brain-dead browsers. Use |
|
# this only for browsers where you know that their SSL implementation |
|
# works correctly. |
|
# Notice: Most problems of broken clients are also related to the HTTP |
|
# keep-alive facility, so you usually additionally want to disable |
|
# keep-alive for those clients, too. Use variable "nokeepalive" for this. |
|
# Similarly, one has to force some clients to use HTTP/1.0 to workaround |
|
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and |
|
# "force-response-1.0" for this. |
|
BrowserMatch "MSIE [2-5]" \ |
|
nokeepalive ssl-unclean-shutdown \ |
|
downgrade-1.0 force-response-1.0 |
|
|
|
# Per-Server Logging: |
|
# The home of a custom SSL log file. Use this when you want a |
|
# compact non-error SSL logfile on a virtual host basis. |
|
CustomLog "/opt/lampp/logs/ssl_request_log" \ |
|
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" |
|
|
|
</VirtualHost>
|
|
|