# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l
# Your preferred terminal emulator
set $term foot
# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
set $menu bemenu-run

### Output configuration
# Set default wallpaper for all outputs
output * bg /usr/share/sxmo/background.jpg fill
# Set 2x scale for DSI-1 (usually a display panel)
output "DSI-1" scale 2

### Idle

exec sxmo_idle.sh start

#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
#   input "2:14:SynPS/2_Synaptics_TouchPad" {
#       dwt enabled
#       tap enabled
#       natural_scroll enabled
#       middle_emulation enabled
#   }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

###### Device-specific
# repeat_delay how much time in milisec to consider it is hold pressed
#    should be long enough to trigger simple click easily but
#    should be short enough to trigger a repeat before the next threshold
# repeat_rate then how much key per second should be triggered
#    adapt it accordingly with the delay.
#    prefer a lower but enough value
# This is enough for 4 multikeys long presses

### PinePhone (pine64-pinephone) / PineTab (pine64-pinetab)
# Power button
input 0:0:axp20x-pek {
    repeat_delay 200
    repeat_rate 15
    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
}
# Volume buttons
input 1:1:1c21800.lradc {
    repeat_delay 200
    repeat_rate 15
    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
}

### BQ Aquaris X5 (bq-paella)
# Power button
input 0:0:pm8941_pwrkey {
    repeat_delay 200
    repeat_rate 15
    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
}
# Volume up button
input 1:1:GPIO_Buttons {
    repeat_delay 200
    repeat_rate 15
    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
}
# Volume down button
input 0:0:pm8941_resin {
    repeat_delay 200
    repeat_rate 15
    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
}
###### End of device-specific

exec sxmo_multikey.sh clear

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Launch appmenu
    bindsym $mod+p exec sxmo_appmenu.sh

    # Multikey handling for power button
    bindsym XF86PowerOff exec sxmo_multikey.sh powerbutton \
        "sxmo_inputhandler.sh powerbutton_one" \
        "sxmo_inputhandler.sh powerbutton_two" \
        "sxmo_inputhandler.sh powerbutton_three"

    # Multikey handling for volup button
    bindsym XF86AudioRaiseVolume exec sxmo_multikey.sh volup \
        "sxmo_inputhandler.sh volup_one" \
        "sxmo_inputhandler.sh volup_two" \
        "sxmo_inputhandler.sh volup_three"

    # Multikey handling for voldown button
    bindsym XF86AudioLowerVolume exec sxmo_multikey.sh voldown \
        "sxmo_inputhandler.sh voldown_one" \
        "sxmo_inputhandler.sh voldown_two" \
        "sxmo_inputhandler.sh voldown_three"

    mode "menu" {
        bindsym --input-device=1:1:1c21800.lradc XF86AudioMute exec nothing # placeholder for "menu" mode
    }

    # Kill focused window
    bindsym $mod+Shift+q kill

    # Start your launcher
    bindsym $mod+d exec $menu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right

    # Move the focused workspace to output
    bindsym $mod+Shift+Ctrl+$left move workspace output left
    bindsym $mod+Shift+Ctrl+$down move workspace output down
    bindsym $mod+Shift+Ctrl+$up move workspace output up
    bindsym $mod+Shift+Ctrl+$right move workspace output right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9
    bindsym $mod+Shift+0 move container to workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    # bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
bar {
    position top

    # When the status_command prints a new line to stdout, swaybar updates.
    # The default just shows the current date and time.
    status_command sxmo_statusbar.sh

    colors {
        statusline #ffffff
        background #323232
        inactive_workspace #32323200 #32323200 #5c5c5c
        font "Mono"
    }
}

default_border pixel 3
titlebar_border_thickness 3

include /etc/sway/config.d/*

exec 'printf %s "$SWAYSOCK" > "$CACHEDIR"/sxmo.swaysock'

exec sxmo_networkmonitor.sh
exec sxmo_modemmonitortoggle.sh restart
exec sxmo_notificationmonitor.sh
exec mako
exec sxmo_hooks.sh lisgdstart
exec sxmo_menumode_toggler.sh