diff --git a/configs/appcfg/sway_template b/configs/appcfg/sway_template
index e938d7a..2d049be 100644
--- a/configs/appcfg/sway_template
+++ b/configs/appcfg/sway_template
@@ -49,51 +49,7 @@ exec sxmo_idle.sh start
 # You can get the names of your inputs by running: swaymsg -t get_inputs
 # Read `man 5 sway-input` for more information about this section.
 
-###### Device-specific
-# repeat_delay how much time in milisec to consider it is hold pressed
-#    should be long enough to trigger simple click easily but
-#    should be short enough to trigger a repeat before the next threshold
-# repeat_rate then how much key per second should be triggered
-#    adapt it accordingly with the delay.
-#    prefer a lower but enough value
-# This is enough for 4 multikeys long presses
-
-### PinePhone (pine64-pinephone) / PineTab (pine64-pinetab)
-# Power button
-input 0:0:axp20x-pek {
-    repeat_delay 200
-    repeat_rate 15
-    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
-}
-# Volume buttons
-input 1:1:1c21800.lradc {
-    repeat_delay 200
-    repeat_rate 15
-    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
-}
-
-### BQ Aquaris X5 (bq-paella)
-# Power button
-input 0:0:pm8941_pwrkey {
-    repeat_delay 200
-    repeat_rate 15
-    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
-}
-# Volume up button
-input 1:1:GPIO_Buttons {
-    repeat_delay 200
-    repeat_rate 15
-    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
-}
-# Volume down button
-input 0:0:pm8941_resin {
-    repeat_delay 200
-    repeat_rate 15
-    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
-}
-###### End of device-specific
-
-exec sxmo_multikey.sh clear
+include /usr/share/sxmo/sway/mobile_inputs_outputs
 
 ### Key bindings
 #
@@ -105,28 +61,6 @@ exec sxmo_multikey.sh clear
     # Launch appmenu
     bindsym $mod+p exec sxmo_appmenu.sh
 
-    # Multikey handling for power button
-    bindsym XF86PowerOff exec sxmo_multikey.sh powerbutton \
-        "sxmo_inputhandler.sh powerbutton_one" \
-        "sxmo_inputhandler.sh powerbutton_two" \
-        "sxmo_inputhandler.sh powerbutton_three"
-
-    # Multikey handling for volup button
-    bindsym XF86AudioRaiseVolume exec sxmo_multikey.sh volup \
-        "sxmo_inputhandler.sh volup_one" \
-        "sxmo_inputhandler.sh volup_two" \
-        "sxmo_inputhandler.sh volup_three"
-
-    # Multikey handling for voldown button
-    bindsym XF86AudioLowerVolume exec sxmo_multikey.sh voldown \
-        "sxmo_inputhandler.sh voldown_one" \
-        "sxmo_inputhandler.sh voldown_two" \
-        "sxmo_inputhandler.sh voldown_three"
-
-    mode "menu" {
-        bindsym --input-device=1:1:1c21800.lradc XF86AudioMute exec nothing # placeholder for "menu" mode
-    }
-
     # Kill focused window
     bindsym $mod+Shift+q kill
 
diff --git a/configs/sway/mobile_inputs_outputs b/configs/sway/mobile_inputs_outputs
new file mode 100644
index 0000000..51dad48
--- /dev/null
+++ b/configs/sway/mobile_inputs_outputs
@@ -0,0 +1,86 @@
+# repeat_delay how much time in milisec to consider it is hold pressed
+#    should be long enough to trigger simple click easily but
+#    should be short enough to trigger a repeat before the next threshold
+# repeat_rate then how much key per second should be triggered
+#    adapt it accordingly with the delay.
+#    prefer a lower but enough value
+# This is enough for 4 multikeys long presses
+
+### PinePhone (pine64-pinephone) / PineTab (pine64-pinetab)
+# Power button
+input 0:0:axp20x-pek {
+    repeat_delay 200
+    repeat_rate 15
+    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
+}
+# Volume buttons
+input 1:1:1c21800.lradc {
+    repeat_delay 200
+    repeat_rate 15
+    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
+}
+
+### BQ Aquaris X5 (bq-paella)
+# Power button
+input 0:0:pm8941_pwrkey {
+    repeat_delay 200
+    repeat_rate 15
+    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
+}
+# Volume up button
+input 1:1:GPIO_Buttons {
+    repeat_delay 200
+    repeat_rate 15
+    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
+}
+# Volume down button
+input 0:0:pm8941_resin {
+    repeat_delay 200
+    repeat_rate 15
+    xkb_file /usr/share/sxmo/sway/xkb_mobile_normal_buttons
+}
+
+exec sxmo_multikey.sh clear
+
+### PinePhone (pine64-pinephone) / PineTab (pine64-pinetab)
+# Multikey handling for power button
+bindsym --input-device=0:0:axp20x-pek XF86PowerOff \
+    exec sxmo_multikey.sh powerbutton \
+    "sxmo_inputhandler.sh powerbutton_one" \
+    "sxmo_inputhandler.sh powerbutton_two" \
+    "sxmo_inputhandler.sh powerbutton_three"
+# Multikey handling for volup button
+bindsym --input-device=1:1:1c21800.lradc XF86AudioRaiseVolume \
+    exec sxmo_multikey.sh volup \
+    "sxmo_inputhandler.sh volup_one" \
+    "sxmo_inputhandler.sh volup_two" \
+    "sxmo_inputhandler.sh volup_three"
+# Multikey handling for voldown button
+bindsym --input-device=1:1:1c21800.lradc XF86AudioLowerVolume \
+    exec sxmo_multikey.sh voldown \
+    "sxmo_inputhandler.sh voldown_one" \
+    "sxmo_inputhandler.sh voldown_two" \
+    "sxmo_inputhandler.sh voldown_three"
+
+### BQ Aquaris X5 (bq-paella)
+bindsym --input-device=0:0:pm8941_pwrkey XF86PowerOff \
+    exec sxmo_multikey.sh powerbutton \
+    "sxmo_inputhandler.sh powerbutton_one" \
+    "sxmo_inputhandler.sh powerbutton_two" \
+    "sxmo_inputhandler.sh powerbutton_three"
+# Multikey handling for volup button
+bindsym --input-device=1:1:GPIO_Buttons XF86AudioRaiseVolume \
+    exec sxmo_multikey.sh volup \
+    "sxmo_inputhandler.sh volup_one" \
+    "sxmo_inputhandler.sh volup_two" \
+    "sxmo_inputhandler.sh volup_three"
+# Multikey handling for voldown button
+bindsym --input-device=0:0:pm8941_resin XF86AudioLowerVolume \
+    exec sxmo_multikey.sh voldown \
+    "sxmo_inputhandler.sh voldown_one" \
+    "sxmo_inputhandler.sh voldown_two" \
+    "sxmo_inputhandler.sh voldown_three"
+
+mode "menu" {
+    bindsym --input-device=1:1:1c21800.lradc XF86AudioMute exec nothing # just a placeholder for "menu" mode
+}