diff --git a/bin/createGif b/bin/images/createGif
similarity index 100%
rename from bin/createGif
rename to bin/images/createGif
diff --git a/bin/imageResizeFolder b/bin/images/imageResizeFolder
similarity index 100%
rename from bin/imageResizeFolder
rename to bin/images/imageResizeFolder
diff --git a/bin/lanPortImages b/bin/images/lanPortImages
similarity index 100%
rename from bin/lanPortImages
rename to bin/images/lanPortImages
diff --git a/bin/imgcat b/bin/imgcat
deleted file mode 100755
index 01845e34..00000000
--- a/bin/imgcat
+++ /dev/null
@@ -1,289 +0,0 @@
-#!/bin/bash
-VERSION="1.2" # Version number of wiw
-
-W3MIMGDISPLAY="/usr/lib/w3m/w3mimgdisplay" # Were w3mimgdisplay is located
-DEL="-" # The default delimiter between items
-DFW="7" # Default font width
-DFH="16" # Default font height
-
-CLEAR="0" # If this is set to 1 it clears the teminal before printing the image
-FIT="1" # If this is set to 1 then wiw will limit the size of the image
-ECHO="0" # If this is set to 1 then wiw will output the command that should be piped into w3mimgdisplay, instead of printing the image
-CENTER="0" # If this is set to 1 then wiw will center the image between x,y and mw,mh
-
-# Print help
-if [[ "$1" == "-h" ]] || [[ "$1" == "--help" ]]; then
-	echo "wiw: w3mimg Wrapper			Version: $VERSION"
-	echo "USAGE"
-	echo "	wiw [-h --help]			Display this"
-	echo "	wiw --size IMAGE		Print the width and height of the image, returned as 'WIDTH HEIGHT'"
-	echo "	wiw [ARGS] IMAGE		Display an image on the terminal"
-	echo "	wiw --echo [ARGS] IMAGE		Print out the command to produce the desired image"
-	echo "	wiw --direct CMD		Pass a command directly into w3mimgdisplay"
-	echo "ARGS"
-	echo "	--clear				Clear the terminal before printing the image"
-	echo "	--no-fit			Don't force the image to fit the terminal"
-	echo "	--center			Tells wiw to center the image in the given space"
-	echo "	-f width${DEL}height			Set the width and height of the font, used to determine max term size and items specified in U" 
-	echo "						(default width = ${DFW}, default height = ${DFH})"
-	echo "	-g x${DEL}y${DEL}width${DEL}height		Set the x, y, width, and height of the image"
-	echo "						(default x = 0, default y = 0, default w = term width, default h = term height)"
-	echo "						You can specify these as a #U (were # is any number) to use the unit of the font"
-	echo "						width and height can be set to R, this will preserve image ratio"
-	echo "	-s x${DEL}y${DEL}width${DEL}height		Set the x, y, width, and height of the source image"
-	echo "						(default x = 0, default y = 0, default w = image width, default h = image height)"
-	echo "						You can specify these as a #U (were # is any number) to use the unit of the font"
-	echo "						This command is a bit weird, I would reccomend not using it unless really needed"
-	echo "	-m width${DEL}height			Set the max width and height the image can consume"
-	echo "						(default w = full term width, default h = full term height)"
-	echo "						You can specify these as a #U (were # is any number) to use the unit of the font"
-	echo "						You can specify these as a #N (were # is any number) to subtract from the max term size"
-	echo "	-c width${DEL}height			Set the cursor position for after the image is printed"
-	echo "						(default x = 0, default y = line after image)"
-	echo "						x and y can be set to LAST, to be placed at the last element"
-	echo "	-d delimiter			Set the delimiter between items in the -f, -g, and -s args (MUST BE A SINGLE CHARACTER)"
-	echo "						(default delimiter = '${DEL}')"
-	exit
-# Print the size of the image
-elif [[ "$1" == "--size" ]]; then
-	echo -e "5;$2" | $W3MIMGDISPLAY
-	exit
-# Pass a command directly into w3mimgdisplay
-elif [[ "$1" == "--direct" ]]; then
-	echo -e "$2" | $W3MIMGDISPLAY
-	exit
-fi
-
-
-
-# Cycle through args
-while [ $# != 1 ]; do
-	if [[ "$1" == "--clear" ]]; then
-		CLEAR="1"
-	elif [[ "$1" == "--no-fit" ]]; then
-		FIT="0"
-	elif [[ "$1" == "--echo" ]]; then
-		ECHO="1"
-	elif [[ "$1" == "--center" ]]; then
-		CENTER="1"
-	elif [[ "$1" == "-f" ]]; then
-		FW=`echo "$2" | cut -d "$DEL" -f1`
-		FH=`echo "$2" | cut -d "$DEL" -f2`
-		shift
-	elif [[ "$1" == "-g" ]]; then
-		X=`echo "$2" | cut -d "$DEL" -f1`
-		Y=`echo "$2" | cut -d "$DEL" -f2`
-		W=`echo "$2" | cut -d "$DEL" -f3`
-		H=`echo "$2" | cut -d "$DEL" -f4`
-		shift
-	elif [[ "$1" == "-s" ]]; then
-		SX=`echo "$2" | cut -d "$DEL" -f1`
-		SY=`echo "$2" | cut -d "$DEL" -f2`
-		SW=`echo "$2" | cut -d "$DEL" -f3`
-		SH=`echo "$2" | cut -d "$DEL" -f4`
-		shift
-	elif [[ "$1" == "-c" ]]; then
-		CX=`echo "$2" | cut -d "$DEL" -f1`
-		CY=`echo "$2" | cut -d "$DEL" -f2`
-		shift
-	elif [[ "$1" == "-m" ]]; then
-		MW=`echo "$2" | cut -d "$DEL" -f1`
-		MH=`echo "$2" | cut -d "$DEL" -f2`
-		shift
-	elif [[ "$1" == "-d" ]]; then
-		DEL="$2"
-		shift
-	fi
-	shift
-done
-
-# Set the file to the only remaining param
-FN="$1"
-shift
-# Test to make sure that the file exists
-test -e "$FN" || exit
-
-### SET DEFAULTS IF THEY WERE NOT SET BY ARGS
-
-# If an font width or height was not set then use the default
-if [[ "$FW" == "" ]]; then
-	FW="$DFW"
-fi
-if [[ "$FH" == "" ]]; then
-	FH="$DFH"
-fi
-
-# If an X or Y was not set then set them to 0
-if [[ "$X" == "" ]]; then
-	X="0";
-fi
-if [[ "$Y" == "" ]]; then
-	Y="0";
-fi
-
-# If an x or y is in U
-if [[ "$X" == *"U" ]]; then
-	X=`echo "$X" | cut -d "U" -f1`
-	X=$(($X * $FW))
-fi
-if [[ "$Y" == *"U" ]]; then
-	Y=`echo "$Y" | cut -d "U" -f1`
-	Y=$(($Y * $FH))
-fi
-
-# Full image  width and height
-read IW IH <<< `echo -e "5;$FN" | $W3MIMGDISPLAY`
-
-# If no width or height were specified use the temp
-if [[ "$W" == "" ]]; then
-	W="$IW";
-fi
-if [[ "$H" == "" ]]; then
-	H="$IH";
-fi
-
-# If a width or height is in U
-if [[ "$W" == *"U" ]]; then
-	W=`echo "$W" | cut -d "U" -f1`
-	W=$(($W * $FW))
-fi
-if [[ "$H" == *"U" ]]; then
-	H=`echo "$H" | cut -d "U" -f1`
-	H=$(($H * $FH))
-fi
-
-# If no sx or sy were set then set them to 0
-if [[ "$SX" == "" ]]; then
-	SX="0";
-fi
-if [[ "$SY" == "" ]]; then
-	SY="0";
-fi
-
-# If an sx or sy is in U
-if [[ "$SX" == *"U" ]]; then
-	SX=`echo "$SX" | cut -d "U" -f1`
-	SX=$(($SX * $FW))
-fi
-if [[ "$SY" == *"U" ]]; then
-	SY=`echo "$SY" | cut -d "U" -f1`
-	SY=$(($SY * $FH))
-fi
-
-# If no s width or s height were specified use the temp
-if [[ "$SW" == "" ]]; then
-	SW="$IW";
-fi
-if [[ "$SH" == "" ]]; then
-	SH="$IH";
-fi
-
-# If a width or height is in U
-if [[ "$SW" == *"U" ]]; then
-	SW=`echo "$SW" | cut -d "U" -f1`
-	SW=$(($SW * $FW))
-fi
-if [[ "$SH" == *"U" ]]; then
-	SH=`echo "$SH" | cut -d "U" -f1`
-	SH=$(($SH * $FH))
-fi
-
-# Get column and line count
-COL=`tput cols`
-LIN=`tput lines`
-
-# TEMPORARY VARIABLES FOR THE ABILITY TO USE BOTH U AND N 
-TMW="$MW"
-TMH="$MH"
-
-# If no max width or height were set then use the default
-if [[ "$TMW" == "" ]]; then
-	MW=$((($FW * $COL) - $X + $SX))
-fi
-if [[ "$TMH" == "" ]]; then
-	MH=$((($FH * $(($LIN - 2)) - $Y + $SY))) # substract lines for prompt
-fi
-
-# If a width or height is in U
-if [[ "$TMW" == *"U"* ]]; then
-	MW=`echo "$MW" | cut -d "U" -f1 | cut -d "N" -f1`
-	MW=$(($MW * $FW))
-fi
-if [[ "$TMH" == *"U"* ]]; then
-	MH=`echo "$MH" | cut -d "U" -f1 | cut -d "N" -f1`
-	MH=$(($MH * $FH))
-fi
-
-# If a width or height is in U
-if [[ "$TMW" == *"N"* ]]; then
-	MW=`echo "$MW" | cut -d "U" -f1 | cut -d "N" -f1`
-	MW=$((($FW * $COL) - $X + $SX - $MW))
-fi
-if [[ "$TMH" == *"N"* ]]; then
-	MH=`echo "$MH" | cut -d "U" -f1 | cut -d "N" -f1`
-	MH=$((($FH * $(($LIN - 2)) - $Y + $SY - $MH)))
-fi
-
-### DONE SETTING DEFAULTS
-
-if [[ "$W" == "R" ]] && [[ "$H" == "R" ]]; then
-	W="$IW";
-	H="$IH";
-elif [[ "$W" == "R" ]]; then
-	W=$(($IW * $H))
-	W=`printf "%.0f" $(echo "scale=2;$W/$IH" | bc)`
-elif [[ "$H" == "R" ]]; then
-	H=$(($IH * $W))
-	H=`printf "%.0f" $(echo "scale=2;$H/$IW" | bc)`
-fi
-
-# If --no-fit was not run then limit size
-if [[ "$FIT" == "1" ]]; then
-	if test $W -gt $MW; then
-		H=$(($H * $MW / $W))
-		W=$MW
-	fi
-	if test $H -gt $MH; then
-		W=$(($W * $MH / $H))
-		H=$MH
-	fi
-fi
-
-# If --center was run
-if [[ "$CENTER" == "1" ]]; then
-	X=$((($MW - $W) / 2))
-	Y=$((($MH - $H) / 2))
-fi
-
-# Format the command
-WC="0;1;$X;$Y;$W;$H;$SX;$SY;$SW;$SH;$FN\n4;\n3;"
-
-# If no cx or cy was set then use the defaults
-if [[ "$CX" == "" ]]; then
-	CX="0";
-fi
-if [[ "$CY" == "" ]]; then
-	CY=$(($H + $Y - $SY))
-	CY=`printf "%.0f" $(echo "scale=2;$CY/$FH" | bc)`
-fi
-
-# If cx or cy was set to LAST
-if [[ "$CX" == "LAST" ]]; then
-	CX="$COL";
-fi
-if [[ "$CY" == "LAST" ]]; then
-	CY="$LIN"
-fi
-
-
-# If --echo was run
-if [[ "$ECHO" == "1" ]]; then 
-	echo -e "$WC"
-else 
-	# If --clear was run
-	if [[ "$CLEAR" == "1" ]]; then
-		clear
-	fi
-	tput cup $CY $CX
-	echo -e "$WC" | $W3MIMGDISPLAY
-fi
diff --git a/bin/notifications/datetime b/bin/notifications/datetime
index 92779139..5049bc46 100755
--- a/bin/notifications/datetime
+++ b/bin/notifications/datetime
@@ -1,3 +1,3 @@
 #!/usr/bin/env bash
 
-notify-send "$(date '+%T')" "$(date '+%A %d %Y')"
+notify-send "$(date '+%T')" "$(date '+%A %d %B %Y')"